All Your 350z News And Views
CNC machine flanges with TIG and MIG welded construction
Utilizes factory 02 sensor position
Gaskets & Hardware included
Lifetime warranty from manufacturer defects
Product DescriptionOBX High performance racing headers are made out of pure SUS-304 stainless steel. Dyno tested at low end and top speed to increase horsepower. Precision mandrel-bend to enhance exhaust gas flow. These one piece type [...]
Continue Reading OBX Header 02-07 Nissan 350Z/ Infiniti G35 3-1
Super Lightweight T-6061 T-6 Aircraft Grade Billet Aluminum
Computer CNC Machined For Precision Balance
Increased Horsepower And Torque Across Entire RPM Range
Dyno-tested And Proven On Race Track
High Quality Polished & Anodized Finishes
Product DescriptionDesigned to replace the OEM crank pulley, OBX Underdrive Crank Pulleys designed to be lighter than the stock pulley. By reducing the rotational mass, the [...]
Continue Reading OBX Red Underdrive Crank Pulley 03-05 Nissan 350Z and 02-05 Infiniti G35/FX35 3.5L DOHC 24V VQ35DE
Tags: 0205, 0305, 3.5L, 350z, Crank, DOHC, G35/FX35, Infiniti, Nissan, Pulley, Underdrive, VQ35DE
Factory amplifier integration harness for 1995-2005 Nissan and Infiniti vehicles
4 RCA Plugs plug into the aftermarket radio’s pre-amp outputs
One 10-pin power plug and one 6-pin speaker plug
Allows for the installation of an aftermarket radio using the existing factory wiring and connectors
1-year Manufacturer’s warranty
Product DescriptionProduct Features: Factory amplifier integration harness for 1995-2005 Nissan and Infiniti vehicles [...]
Continue Reading Metra 70-7551 Amplifier Integration Harness 995-2005 Nissan and Infiniti
Tags: 707551, 9952005, Amplifier, Harness, Infiniti, Integration, Metra, Nissan
Made in Japan
Stronger than OEM tie rods
Increased steering angle
Product DescriptionTEIN Tie Rods and Tie Rod Ends are designed to replace weak OEM components. The TEIN units are not only stronger but are also capable of increased steering angle. By utilizing a larger diameter rod and stronger materials, TEIN was able to increase rod strength by [...]
Continue Reading Tein inner tie rod for Nissan 350Z and Infiniti G35
Made in USA
CNC machined 6061 aluminum shell for precise fitment
Improve handling and feedback
Self cleaning and lubricating Endura bearing
Product DescriptionOur front compression bushings replace the stock mushy rubber bushings with low-friction articulating spherical bearings, eliminating bushing flex and reducing friction. This maintains optimum suspension geometry under load, to improve handling and feedback. Our bushings feature bearings [...]
Continue Reading SPL front compression rod bushings for Nissan 350Z and Infiniti G35
Made in USA
CNC machined 4130 chomoly bolts
CNC machined 6061 aluminum spacers for endlink alignment
65deg high misalignment bearing to eliminate binding
1/2″ bearing for increased load capacity
Product DescriptionOur endlinks feature massive 1/2″ bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Adjustable spacers allow positioning of the endlink for best alignment with [...]
Continue Reading SPL sway bar endlink for Nissan 350Z and Infiniti G35 front
Suspension Strut Rod
Product DescriptionOES Genuine Sway Bar Link; 2003 Infiniti G35, Coupe; 2003 Infiniti G35, Sedan; 2004 Infiniti G35, Coupe; 2004 Infiniti G35, Coupe, AT; 2004 Infiniti G35, Sedan, RWD; 2005 Infiniti G35, Coupe; 2005 Infiniti G35, Coupe, AT; 2005 Infiniti G35, Sedan, RWD; 20… More >>
OES Genuine Sway Bar Link for select Infiniti G35/Nissan [...]
Continue Reading OES Genuine Sway Bar Link for select Infiniti G35/Nissan 350Z models
Tags: 350z, G35/Nissan, Genuine, Infiniti, Link, Models, select, Sway
Made in USA
CNC machined 6061 aluminum shell for precise fitment
Improve handling and feedback
Self cleaning and lubricating Endura bearing
Product DescriptionOur front lower arm bushings replace the stock mushy rubber bushings with low-friction articulating spherical bearings, eliminating bushing flex and reducing friction. This maintains optimum suspension geometry under load, to improve handling and feedback. Our bushings feature [...]
Continue Reading SPL front lower arm inner bushing for Nissan 350Z and Infiniti G35
Made in USA
CNC machined 6061 aluminum for precise fitment
Self cleaning and lubricating Endura bearing
Product DescriptionOur monoball bushings for the rear knuckle replace the stock mushy rubber bushings with low-friction articulating spherical bearings, eliminating bushing flex and reducing bind/friction. This maintains optimum suspension geometry under load, to improve handling and feedback. Our bushings feature bearings [...]
Continue Reading SPL rear knuckle monoball bushings for Nissan 350Z and Infiniti G35
Tags: 350z, bushings, Infiniti, knuckle, monoball, Nissan, REAR
Recent Articles
Categories
